Skip to content
JobsiteBooked

Roofing

Roofing invoice template and example

A roofing invoice should match the signed estimate line for line. Here's a blank template, a filled-in replacement, and the deposit math.

A finished new charcoal shingle roof on a two-storey house, the job done and the yard cleaned up

Travis Hayes

· 7 min read

Add to Preferred Sources

The template follows the signed-estimate layout roofers use, and the numbers were checked November 6, 2026 against the sources linked in the article.

A roofing invoice is the bill for the roof once the work is done. It should match the signed estimate line for line, so the homeowner sees nothing they didn't agree to. Below is the blank template, the same template filled in for a roof replacement, and the steps to send one from JobsiteBooked. There's more on the roofing page.

What a roofing invoice needs

  • Your business: name, address, phone, email and license number.
  • Invoice number and date, so both sides can find it later.
  • Due date: on receipt, or a set day.
  • The customer and the job address, plus a billing address if it's different.
  • The estimate it follows, by number and the date it was signed.
  • The work done, priced by the square where the roof is.
  • Permit and disposal, each as its own line.
  • Payments already made: the deposit and any progress payments.
  • Balance due.
  • How to pay: card link, check or bank transfer.
  • Late fee, stated in the terms.
  • Warranty: workmanship years and the shingle maker's warranty.

The estimate number matters most. The homeowner can hold the invoice next to what they signed and check every line. If you're still on the bid, start with the roofing estimate template.

Roofing invoice template (blank)

Two free downloads, no email asked. Type into the PDF on screen, or print it and fill it in by hand.

Page 1 of a blank roofing invoice: invoice number, dates and the estimate it follows, bill to, insurance claim, work done lines with quantity, unit price and amount, subtotal, sales tax, invoice total, payments made and balance due

More contractor templates, free to copy and print.

Roofing invoice example (filled in)

Here's the same template filled in for a 24-square asphalt roof replacement. JobsiteBooked Construction is a made-up company. The prices sit inside the ranges further down the page, and they're examples, not quotes.

Page 1 of a filled-in roofing invoice, INV-1002 for Pat Moreno: tear-off, deck repair, ice and water barrier, architectural shingles and permit for $14,634.00, less a $1,000.00 deposit and a $2,634.00 progress payment, balance due $11,000.00

Why each block is there:

  • The progress payment names the work it paid for. Tear-off, deck, barrier and permit add up to $2,634.00, the value of that work. In California, the CSLB rule below makes this a legal requirement.
  • The deck line is priced by the square foot. The homeowner can check the 96 sq ft against the rotted sheets found at tear-off.
  • The tax line is a placeholder. States treat roofing work differently, so check yours before you fill it in.

Deposits and progress payments on a roofing invoice

A roof replacement is often paid in parts. A deposit comes at signing. A progress payment comes once the tear-off and dry-in are done. The balance comes at completion.

Each invoice after the first lists everything already paid. The homeowner sees the math, so the balance is never a surprise. Name the work each payment covered, not only the date.

State rules differ on how much you can take before the work. California is a clear example. Its contractor board, the CSLB, caps the down payment at $1,000 or 10 percent of the contract price, whichever is less. Later payments must not exceed the value of work done and materials delivered. Each progress payment must say what work it covers. The rule is in the CSLB's progress payment bulletin.

On the example's $14,634 job, that caps the deposit at $1,000. The payment schedule itself belongs in the roofing contract template, signed before work starts. This page is a starting point, not legal advice. Check your own state's rules before you set a deposit.

Pricing the lines: what roof work costs

Use these to sanity-check your own prices. They're national averages from published cost guides, and local prices vary.

  • Shingles installed. This Old House puts an installed asphalt shingle roof at $5.16 a square foot on average. That's $10,319 for a 2,000 sq ft roof, or about $516 a square. Its national average for a new 2,000 sq ft roof, across every material, is $29,909. Fixr gives $3.75 to $11 a square foot for a replacement, with $4.75 as the average. For asphalt, Fixr puts the whole job at $6,000 to $10,000.

  • Labor. This Old House says labor is 65% of the project cost. It gives about $75 an hour as the average rate, citing the Roofers Guild. Fixr puts labor at 40% to 60% of the total. The two guides differ, so compare your own split against both.

  • Tear-off. Fixr gives about $50 a square, dumping included. It runs up to about $150 a square for heavy materials or several layers.

  • Deck. Replacing roof decking runs $2 to $8 a square foot.

  • Ice and water barrier. About $0.50 a square foot, or about $50 a square.

  • Permit. A roofing permit runs $100 to $500.

  • Bundles. Fine Homebuilding counts 3 bundles a square for standard shingles. Heavier and laminated shingles take 4 to 5. The same builder allows about 1% waste on a simple roof. A complex roof with open valleys takes 5% or more. Many roofing calculators use 10% to 15%, so compare both before you order.

How to send a roofing invoice from JobsiteBooked

The steps below were done in the app with a demo company, JobsiteBooked Construction. They cover the deposit and the final invoice. The progress payment from the paper example isn't part of them, so the balance here is $13,634.00.

  1. Open the signed estimate. Estimate #1044 shows Won, with the architectural shingle option and the deck add-on picked. The $1,000.00 deposit shows as paid by card. Press Make invoice.

The deposit was paid on the estimate, before the crew set a ladder.

  1. Check the draft. Invoice INV-1002 to Pat Moreno carries the same five lines and amounts. The deposit comes off, leaving $13,634.00 due on receipt. The terms block holds the late fee.
Draft invoice INV-1002 for Pat Moreno: five roof lines, the $1,000.00 deposit taken off, $13,634.00 due, and the terms

The lines come from the signed estimate, so nothing gets retyped.

  1. Send it by text and email. Tick the homeowner's mobile and email, then send. The invoice shows Sent.

The office sends it. It doesn't go out by itself.

  1. The homeowner gets a text. It comes from JobsiteBooked Construction, with the invoice link and a pay link for $13,634.00.

The amount is right in the text, from the business's own name.

  1. They pay by card. The pay page shows JobsiteBooked Construction's name, the $13,634.00 due and a card form. A paid confirmation follows.
Pay page on a phone for invoice INV-1002: $13,634.00 due, a card form and a Pay $13,634.00 button
The same pay page after paying: Paid $13,634.00, amount due $0.00, and This invoice is paid. Thank you.

The pay page opens in the phone's browser. There's nothing to download.

  1. It shows Paid in the office. INV-1002 is marked Paid, and Owes now on the homeowner's client page drops to $0.
Pat Moreno's client page: invoice INV-1002 marked Paid, Owes now $0.00, Paid to date $14,634.00

The office sees the roof is settled, and nobody has to call and ask.

An unpaid invoice gets email reminders on its due date, then while it's overdue. See how invoicing works in JobsiteBooked and how card payments by text work.

Travis Hayes

Travis Hayes writes JobsiteBooked's guides for roofers and other contractors: the quotes, inspection reports, contracts and invoices a job runs on.

Before the invoice goes out

0 of 5

Roofing invoice questions

How do I make an invoice for roofing?
Start from the signed estimate and copy its lines. Add any extra work the homeowner approved as its own priced line. Take off the deposit and any progress payments, then state the balance, the due date and how to pay.
What should a contractor include on an invoice?
Include your business name and license number, an invoice number and dates, and the customer and job address. Then list the line items, payments already made and the balance due. Close with how to pay, the late fee and the warranty.
How do I write a roofing invoice for insurance?
Add the insurance company, the claim number and the date of loss near the top. Itemise the work by the square, and keep before and after photos with the invoice. What the insurer covers depends on the policy, so don't promise the homeowner an amount.
What is progress billing in construction?
Progress billing means billing a large job in parts as each stage is done. On a roof, that's often a deposit, a payment after tear-off and dry-in, and the balance at completion. Some states limit it: California caps the deposit and holds later payments to the work done.
Can I use a receipt as an invoice?
No. An invoice asks for payment, and a receipt proves payment was made. Send the invoice first. Once the homeowner pays, mark that invoice paid with the date and the method, and keep a copy with the job file. In JobsiteBooked, each payment on the invoice has a Send receipt button.
Contractor checking the day's jobs on a tablet in the workshop before heading out

Your next roof

Send the final invoice with the deposit off

Make the invoice from the signed estimate, send it by text and email, and see it marked Paid when the card goes through.

  • 7-day trial, no card
  • Solo $97, Crew $197, Company $297 a month