Travis Hayes
· 8 min read
Prices are national ranges from the sources linked, read November 6, 2026, and checked by Travis Hayes.
A homeowner pricing a new roof usually gets several quotes and lays them side by side. The one they trust spells out the scope: what comes off, what goes on, what's left out. Here, a roofing quote and a roofing estimate are the same thing: a priced offer the customer signs. The template is right below, as a fillable PDF or an Excel sheet that does the math, then the same quote filled in. There's more for your trade on the roofers page.
The roofing quote template
Two free downloads, no email asked. Type into the PDF on screen, or print it and fill it in by hand. The Excel sheet does the math: measure the roof on the first tab, and the squares, line totals, deposit and balance fill in on the quote.
The same quote, filled in
Here it is for a hip roof in Springfield, Illinois. JobsiteBooked Construction and Dana Whitfield are invented. The prices sit inside the national ranges further down.
The terms and deposit lines are a place to start, not legal advice. Deposit, contract and cancellation rules change from state to state, so check yours. California's deposit rule is further down as one example.
Need a general estimate, invoice or job-site checklist? See our free templates.
How to fill it in, line by line
- Measure in squares. A square is 100 sq ft of roof (Fine Homebuilding's estimating guide). Measure the footprint with the overhangs, then multiply by the pitch factor. On a 6/12 roof that factor is 1.118, the square root of 1 + 0.5². In the example, 1,968 sq ft × 1.118 ≈ 2,200 sq ft, or 22 squares.
- Add waste before you price. The same guide allows 1% on a simple roof. It allows 5% or more on a cut-up roof with open valleys, plus two extra shingles per foot of valley. Many online calculators allow far more, so compare with your own past jobs. The example hip roof, with two valleys, is priced on 24 squares.
- Count bundles from the squares. Most 3-tab runs 3 bundles to the square. Heavier laminated shingles take 4, sometimes 5. One bundle of 3-tab caps about 35 feet of ridge or hip.
- Price tear-off on its own, per square and per layer. A second layer found on the day is then a clear extra.
- Give disposal and the permit their own lines. The homeowner sees what each charge is for.
- Name what goes on the roof. Two quotes at the same price a square can be different roofs. Write the shingle line and color, the underlayment, where the ice and water shield goes, and whether the vents stay or get replaced. The example puts ice and water shield along the eaves and in both valleys.
- Write what's left out. Gutters, fascia, skylights, interior repair. This one line heads off most arguments.
- Give three options. The section after the prices shows how.
What roofing costs in 2026: the numbers to check yours against
These are national ranges, read November 6, 2026. Local prices swing widely. Use them to check your prices, not to copy them.
| Installed, per square (100 sq ft) | National range |
|---|---|
| 3-tab asphalt | $425–$825 |
| Architectural asphalt | $450–$1,250 |
| Steel | $450–$1,700 |
| Aluminum | $650–$2,100 |
| Labor alone, part of the prices above | $200–$350 |
| Add to the job | National range |
|---|---|
| Tear-off, per square | an extra $100–$150 |
| Debris disposal | $450–$750 |
| Permit | usually $150–$600 |
| Deck damage found at tear-off | $150 to $1,000 or more |
| Whole roof, as a check | Average |
|---|---|
| 2,000 sq ft roof (Inch Calculator) | about $14,000; typical $6,700–$25,000 |
| Shingling a roof (Fixr) | about $14,500; most $8,000–$36,000 |
| New 2,000 sq ft roof (This Old House) | $29,909; asphalt alone $10,319 |
The per-square prices, labor, tear-off and disposal are from Inch Calculator's roof replacement costs (page dated July 18, 2023, prices labeled 2026). The permit and deck numbers are from Fixr's shingle installation costs (updated January 30, 2026). This Old House's new roof costs were updated October 7, 2026.
For a 2,000 sq ft roof, the averages run from about $14,000 to $29,909, depending on whose numbers you read. That gap is why the line items matter more than the total. The example's Option B, at $15,700, sits near the two lower averages.
The guides split on labor's share as well. Inch Calculator puts it at about 40–50% of installation cost. Fixr says 60% of a replacement, and This Old House says 65% of the project.
Three options on one quote
With one price, the homeowner compares you to the next roofer. With three, they compare your options.
3-tab keeps the cost down. Architectural is your pick, so mark it Recommended. Steel is for the homeowner staying put for the long haul.
Keep the scope identical across all three, so only the material changes. Add-ons, like the decking repair, sit under the options for the homeowner to tick or skip.
Warranty, deposit and decking: the lines that save arguments
Two warranties, two lines. The shingle maker covers the materials. You cover the install. Owens Corning's warranty tiers show the difference:
- Standard Product Limited Lifetime: 10 years non-prorated, no workmanship cover.
- System Protection: 50 years, no workmanship cover.
- Preferred Protection: 50 years, with 10 years of workmanship cover.
- Platinum Protection: 50 years non-prorated, and workmanship covered for life, reduced after 25 years. Only an Owens Corning Platinum contractor can offer it.
Write on the quote which one it includes.
Decking. Nobody sees the deck until the old roof is off. Price a few sheets now as an add-on. Anything past that gets its own estimate, signed before the work goes on.
Deposit. Many states limit it. In California, a home improvement down payment can't be more than $1,000 or 10% of the price, whichever is less. Jobs over $500 also need a written contract, per California's contractor board, the CSLB. The example's $1,000 deposit meets that cap on any job of $10,000 or more. Your state may differ, and this isn't legal advice.
Right to cancel. If you sell the job at the customer's home, the FTC's Cooling-Off Rule usually gives them until midnight of the third business day to cancel a sale of $25 or more. You must give them two copies of a cancellation form when they sign. The template's terms have a line for it.
Build the same quote in JobsiteBooked
Here's how Dana's quote goes in JobsiteBooked: built in the office, signed on a phone.
- Start from a saved template. In Estimates, press New estimate, pick Dana Whitfield, and under Start from choose "Shingle re-roof, 3 options". Save as a template turns any estimate into one.
Your last re-roof is the starting point, not a blank page.
- Set the options and the add-on. In Options, turn on Offer options. Name the three, mark the architectural one Recommended, and give each a one-line What it is. Add the decking repair under Optional add-ons and set Deposit on approval to $1,000.

Your cost shows on each line for the owner only. The crew and office staff never see it.
- Add photos and terms. Put the six captioned roof photos in Photos and files. The template's lines fill Terms and warranty. Set Good for to 30 days.
The homeowner sees the soft decking you're pricing for.
- Check what the client sees. Open What Dana sees. Turn on They pick one of the options, Show quantities, Show unit prices, Show line totals and Ask for their signature.

Read it the way Dana will, before it goes.
- Send it by text and email. The text holds a short note and the link. The email subject reads "Your roof quote from JobsiteBooked Construction (1042)". Press Send now.
No reply? A text goes at 2 days, then a text and email at 5. Both stop once it's signed.
- See when it's opened. The quote's card moves to Viewed on the Estimates board.
Opened but no answer: that's the day to call.
- The homeowner picks, signs and pays the deposit. On their phone, Dana picks the architectural roof under Pick one, ticks the decking, and sees $16,150. Approve and sign takes a finger signature and their full name. The $1,000 deposit comes next. More on card payments by text.


One link carries the quote, the signature and the deposit.
Every plan has every feature: Solo $97 a month, Crew $197, Company $297. The trial runs 7 days, with no card. Start your trial, or read how estimates work in JobsiteBooked.
Travis Hayes
Travis Hayes writes JobsiteBooked's guides for roofers and other contractors: the quotes, inspection reports, contracts and invoices a job runs on.





